Powered by Jitbit .Net Forum free trial version. dismiss

HomeGeneral

General issues

Radius Rejecting Dynamic Vlan Auth Wifi Client Messages in this topic - RSS

TheBadger
TheBadger
Posts: 13


3.08.2018
TheBadger
TheBadger
Posts: 13
Hi,

My wired clients are gaining auth and a VLAN perfectly but the same user connecting on wifi gets the following error. Can you give me any insights to what I can try to get the same user auth through wifi.

This is the error on the log
----------------------------------

03.08.2018 10:23:54.731 - RadAuth req. from : 10.10.2.7:46540 [UDP]

Size : 166 / 166
Identifier : 1
Attributes :

Connect-Info = CONNECT 11Mbps 802.11b
Calling-Station-Id = 8C-85-90-27-DD-83
NAS-Identifier = fcecda40b248
User-Name = 8c859027dd83
Called-Station-Id = FC-EC-DA-40-B2-4A:Entanet
NAS-Port-Type = 19
NAS-IP-Address = 10.10.2.7

03.08.2018 10:23:54.731 - PAP Authentication failed for user '8c859027dd83', User-Password does not match ().

03.08.2018 10:23:54.731 - Authentication failed for user '8c859027dd83'

---------------
attached is the unifi setup page for the wifi

0 link
Admin
Admin
Administrator
Posts: 4876


3.08.2018
Admin
Admin
Administrator
Posts: 4876
Hi,

Can you send me a Wireshark trace for this authentication attempt from TekRADIUS installed machine?

Best regards,

Yasin KAPLAN
0 link
TheBadger
TheBadger
Posts: 13


3.08.2018
TheBadger
TheBadger
Posts: 13
I just made some changes to the AP and it accepted a connection from my phone and assigned the VLAN, I will test with a few more devices, could have just been a password issue in the end.
Admin wrote:
Hi,

Can you send me a Wireshark trace for this authentication attempt from TekRADIUS installed machine?

Best regards,

Yasin KAPLAN
0 link






Powered by Jitbit Forum 8.3.8.0 © 2006-2013 Jitbit Software