Interoperability with RADIUS clients & servers
29.07.2010 21:05:19
mcarey
Posts: 1
|
Hello all, I am new to TekRADIUS and was hoping one of you all could help me with and issue. I have everything in Tek setup right, on a SQL 2008 DB. All the settings are right. I have looked over the forum and found the AV-pair and Nas-Prompt setting. Now my problem is that when I use Tek it will authenticate my user but disables my enable password. I am using telnet currently for testing. If I turn off Tek I can then login to my switch using the local username and pass, this then will allow me to use enable. Now this switch was attached to a different RADIUS server that we are getting rid of and the only thing that I can think of that is doing this is maybe the aaa settings. Here is copy of my config, and I did change the ports in tek first. Thank you for any help you can give.
my switch
Password:
Password:
my switch#
Building configuration...
Current configuration:
!
! Last configuration change at 13:08:03 EDT Thu Jul 29 2010 by mcarey
! NVRAM config last updated at 13:08:20 EDT Thu Jul 29 2010 by mcarey
!
version 12.0
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname my switch
!
aaa new-model
aaa authentication login default group radius local
aaa authentication enable default group radius enable
aaa authorization network default group radius local
enable secret noneyabusiness
!
username username password 7 nonyabusiness
!
!
!
!
clock timezone EST -5
clock summer-time EDT recurring
!
ip subnet-zero
!
!
!
INSERT ALOT OF INTERFACES YOU DONT CARE ABOUT <-----------------------------
!
interface VLAN1
ip address 0.0.0.0 0.0.0.0
no ip directed-broadcast
no ip route-cache
!
ip default-gateway 0.0.0.254
ip radius source-interface VLAN1
l
radius-server host 10.0.0.0 auth-port 1818 acct-port 1819 key SOmeK3y
banner motd ^CC
|
|
0
• permalink
|
30.07.2010 16:29:13
Admin
Administrator
Posts: 1684
|
Hi,
Please see;
http://forums.tekradius.com/topic262-configuration-on-tekradius-for-authentication.aspx
Best regards,
Yasin KAPLAN
|
|
0
• permalink
|