TekRADIUS :: Forum

05.03.2010 19:10:58 grevagildo Posts: 4	Hi all, Can TekRADIUS assigh VLANs to PCs/Users connected to a CISCO 3550 switch (configuring the attributes)? Whitch configuration i have to make on the user (or group)? Best regards, Grevagildo
	• permalink • reply with quote
06.03.2010 09:54:17 admin Administrator Posts: 881	Dear Grevagildo, You should create a user profile with following attributes; testuser User-Password = test (Check) Tunnel-Type = VLAN (Success-Reply) Tunnel-Medium-Type = 802 (Success-Reply) Tunnel-Private-Group-ID = <You VLAN ID> (Success-Reply) You can have a group prfile with Tunnel-Type, Tunnel-Medium-Type and Tunnel-Private-Group-ID attributes. Best regards, Yasin KAPLAN
	• permalink • reply with quote
06.03.2010 13:30:32 grevagildo Posts: 4	Hi, Thanks for the fast reply. It´s done. Do you have any idea why the framed ip address of the host (PC) don´t show on the active sessions? (I´m using a cisco 3550 switch as Authenticator). Best regards, Grevagildo
	• permalink • reply with quote
06.03.2010 17:29:25 admin Administrator Posts: 881	IP address assignment is done after connecting to the VLAN if you use DHCP. I think that's why TekRADIUS does not receive IP address information.
	• permalink • reply with quote

---