20.01.2010 01:53:58
nl17185
Posts: 13
|
Hello, I want to test the tekRadius but I'm not able to select my LAN adapter configured with a 192.168.x.x address.
I only can see the loopback address and my wireless adapter. Disabling the firewall didn't help either.
Because I cannot select my LAN adapter the tekradius logfile doesn't show anything.
Am I doing something wrong ?
|
|
0
• permalink
|
20.01.2010 11:25:48
Admin
Administrator
Posts: 1684
|
Hi,
Please make sure that you IP interface is configured properly and enabled. Can you also send me "ipconfig /all" output from command line?
Best regards,
Yasin KAPLAN
|
|
0
• permalink
|
20.01.2010 12:17:03
nl17185
Posts: 13
|
Hello Yasin,
The interface was enabled, I created another test enviroment and that worked fine, thank you for your response !
Regards Marcel
|
|
0
• permalink
|
20.01.2010 12:18:04
Admin
Administrator
Posts: 1684
|
You welcome
|
|
0
• permalink
|
02.03.2010 19:34:39
MEBD
Posts: 6
|
Minor bug... I had noticed with my TekRADIUS install, that I could not select the correct network interface either. I had Windows 2003 R2 with 2 different network interfaces on a VMware server installation. The manual says I should be able to see all configured network interfaces to select which one to listen on. I could only see one and the 127.0.0.1 in the dropdown box.
I eventually determined that I could not see the interface that did not have a default gateway (only one NIC did). When I entered the default gateway on the other NIC instead, that NIC was now the one visible as a listen choice on the drop-down box.
|
|
0
• permalink
|
02.03.2010 21:34:54
Admin
Administrator
Posts: 1684
|
Hi,
Have you installed latest build on the TekSIP web site?
|
|
0
• permalink
|
02.03.2010 21:37:39
MEBD
Posts: 6
|
I noticed after I posted that you mentioned in another thread -the issue has been fixed and the update will take care of it. I have not yet updated the version.
|
|
0
• permalink
|