|
15.09.2008 21:06:16
|
DaveT
Posts 3
|
I'm trying to get this to work with a D-Link DWL 2700 AP. I have TekRadius set up and working on the server and have used software called Radius Test to confim. I still can not connect with the D-Link. I'm wondering if I have some bad settings somewhere.
I'm using 802.1x auth on the D-Link with WEP cypher. On the wireless connection properties on my computer (Win XP Pro) for the Dlink connection, I'm using the following settings:
Any help would be appreciated.
|
|
16.10.2008 11:31:59
|
admin
Posts 110
|
Hi,
Please make following changes;
1. Set Network Authentication = WPA and Data Encryption = TKIP at Association tab.
2. Uncheck "Validate Server Certificate" at Prorected EAP Proprties dialog.
Best regards,
Yasin KAPLAN
|
|
17.10.2008 01:03:51
|
DaveT
Posts 3
|
Worked like a charm.
Thanks and great job on TekRadius.
|
|
17.10.2008 11:28:56
|
admin
Posts 110
|
You welcome.
Best regards,
Yasin KAPLAN
|
|
26.10.2008 17:38:31
|
Dusan Zervan
Posts 2
|
Hello
I have similar problem as DaveT had - but I set WPA/TKIP on client side already and did not help.
My WiFi router is ZCOMAX WA-2204A-TX (I've tried also CANYON CN-WF514).
On the client is Windows XP SP3 installed.
When I try to connect, system is asking for the name and password so I write them but system is asking again and again... 
WireShark on TekRadius server is showing these steps:
In logfile is:
26. 10. 2008 14:06:08 - TekRADIUS Service 2.8.0.0 is being started.
26. 10. 2008 14:06:08 - TekRADIUS Service is listening on : 10.10.10.8 (1 client(s))
RadAuth req. from : 10.10.10.2 - 26. 10. 2008 14:06:23
Size : 165 / 165
Identifier : 109
Attributes :
Connect-Info = CONNECT 11Mbps 802.11b
Calling-Station-Id = 0015afe6ae46
NAS-Port-Type = 19
Called-Station-Id = 0002726a9057
User-Name = test
NAS-IP-Address = 10.10.10.2
NAS-Identifier = Realtek Access Point. 8181
Service-Type = 2
Framed-MTU = 1400
NAS-Port = 0
26. 10. 2008 14:06:23 - User configured for PEAP authentication; starting PEAP session.
26. 10. 2008 14:06:23 - PEAP Challenge sent for user 'test'.
RadAuth req. from : 10.10.10.2 - 26. 10. 2008 14:06:23
Size : 264 / 264
Identifier : 110
Attributes :
Connect-Info = CONNECT 11Mbps 802.11b
Calling-Station-Id = 0015afe6ae46
NAS-Port-Type = 19
Called-Station-Id = 0002726a9057
User-Name = test
NAS-IP-Address = 10.10.10.2
NAS-Identifier = Realtek Access Point. 8181
Service-Type = 2
NAS-Port = 0
State = 601fdf0c5c077584d3ae980c6c751c19
26. 10. 2008 14:06:23 - PEAP Challenge sent for user 'test'.
RadAuth req. from : 10.10.10.2 - 26. 10. 2008 14:06:23
Size : 506 / 506
Identifier : 111
Attributes :
Connect-Info = CONNECT 11Mbps 802.11b
Calling-Station-Id = 0015afe6ae46
NAS-Port-Type = 19
Called-Station-Id = 0002726a9057
User-Name = test
NAS-IP-Address = 10.10.10.2
NAS-Identifier = Realtek Access Point. 8181
Service-Type = 2
NAS-Port = 0
State = 601fdf0c5c077584d3ae980c6c751c19
26. 10. 2008 14:06:23 - Debug Message : (Radius Authentication)
Chybné údaje. (it is in slovak and means: Wrong data)
Connect-Info = CONNECT 11Mbps 802.11b
Calling-Station-Id = 0015afe6ae46
NAS-Port-Type = 19
Called-Station-Id = 0002726a9057
User-Name = test
NAS-IP-Address = 10.10.10.2
NAS-Identifier = Realtek Access Point. 8181
Service-Type = 2
NAS-Port = 0
State = 601fdf0c5c077584d3ae980c6c751c19
Should I change Vendor for Client?
These are my user settings:
|
|
26.10.2008 18:56:27
|
admin
Posts 110
|
Hi,
Can you send Ethereal capture file to info@tekradius.com? How did you generate the certificate?
Best regards,
Yasin KAPLAN
edited by admin on 26.10.2008
|
|
29.10.2008 00:22:18
|
Dusan Zervan
Posts 2
|
Sorry for my late answer, I didn't notice your answer here.
Certificate was created using TekCERT as described in ssssl.pdf.
I have captured again and I'm going to send it to you now (and uploaded here
There is Vista 64-bit installed on the server with TekRadius and firewall was disabled while testing.
|
|
pages:
1 |
|---|